20
message will be played to your callers. They will not be able to leave
you a message.
• In idle mode, press
M
and . to show ANS. MACHINE.
• Press
M
and . to show TAM ON/OFF.
• Press
M
and . to choose ON or OFF.
• Press
M
to confirm the setting.
12.2 Play messages on TAM
When new messages are recorded, the TAM indicator on the base and
TAM icon on the handset both flash.
If you have new messages, they are played first, and then saved as old
messages, until they are deleted. Old messages are played again after
all new messages are played completely.
• In idle mode, press
M
and . to show ANS. MACHINE.
• Press
M
to show MSG PLAYBACK.
• Press
M
to start playing any messages through its loudspeaker.
• Note: The display shows the time and date that the message was
recorded, and a symbol at the top of the screen if it is a new
message.
• For options during playback:
Press . to increase or decrease the playback volume
Press
M
and . for the options:
STOP to stop the playback.
FORWARD to skip on to the next message.
PREVIOUS to repeat the current message playing.
DELETE to delete the current message playing.
Alternatively, press the following digit keys:
5 to stop the playback.
6 to skip on to the next message.
4 to repeat the current message playing.
4,4 to skip back to the previous message.
2 to delete the current message playing.
NOTE:
You cannot delete new messages, so you will have to play them before
trying to delete.
To Next Page
Loading...
