AEG OSC6N181ES - Ventilation requirements; Control Panel

Make sure the electricity supply voltage is
the same as that indicated on the
appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse
(B). In the event of having to change the fuse
in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that it is disposed of safely.
3.4 Ventilation requirements
The airflow behind the appliance must be
sufficient.
min. 200 cm
2
min.
200 cm
2
min.
38 mm
min.
38 mm
CAUTION!
Refer to the installation instructions for
the installation.
3.5 Door reversibility
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION!
At every stage of reversing the door
protect the floor from scratching with a
durable material.
4. CONTROL PANEL
1 2
4 3
1 2 3
5 4
1
Temperature indicator LED
2
Alarm light
3
Frostmatic indicator
4
Frostmatic button
ENGLISH 9