EasyManua.ls Logo

AEG Protect PV 2800 User Manual

AEG Protect PV 2800
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
OPERATING INSTRUCTIONS
EN
PROTECT PV 2000
AND 2800
ON-GRID SOLAR INVERTER
DOC N° 07/08/1002-2 Rev 04
Question and Answer IconNeed help?

Do you have a question about the AEG Protect PV 2800 and is the answer not in the manual?

AEG Protect PV 2800 Specifications

General IconGeneral
ModelAEG Protect PV 2800
Output Voltage230 V
AC nominal voltage230 V
CoolingNatural convection
Rated Power2800 W
Max. apparent AC power2800 VA
Frequency50/60 Hz
Protection FeaturesOvervoltage, overcurrent, short circuit, overheating, anti-islanding

Summary

Before You Start

Safety Instructions

Risk of Electric Shock

Details potential electrical hazards and precautions.

Hot Surfaces

Information regarding hot components during operation.

Limited Warranty

Terms of Warranty

Specific conditions, duration, and coverage of the product warranty.

Warranty Claims Procedure

Steps to follow when making a warranty claim for the inverter.

Warranty Exclusions

Conditions and scenarios not covered by the product warranty.

Warranty Extension Options

Information on purchasing extended warranty coverage for the inverter.

1. Overview

2. Features

3. Installation Instructions

Opening the Package

Instructions for unpacking and checking the PV-Inverter contents.

Before Installation

Pre-installation checks and environmental considerations.

Mounting Protect PV to the Wall

Detailed steps for securely mounting the inverter to a wall.

Connecting to the Grid (AC Utility)

Procedure for connecting the inverter to the AC power grid.

Connect to PV Panel (DC Input)

Instructions for connecting the DC input from PV panels.

Checking

Steps to verify the inverter's status after installation.

4. System Diagram

5. Operating Your PV-Inverter

Modes of Operation

Describes the different operating states of the PV-Inverter.

Front Panel Interface

Details about the inverter's front panel interface and indicators.

Maximum Power Point Tracking (MPPT)

Accuracy of Readings

6. Inverter Status

Display Information

Table detailing messages and descriptions for inverter status.

LED Status Indicators

Explanation of the green and red LED indicators for operation and faults.

7. Communications

RS232 Communication Port

Information on using the RS232 port for monitoring and firmware upgrades.

Optional Communication Ports

Details on optional communication cards like RS485.

Firmware Upgrade Procedure

Instructions for updating the inverter's firmware via RS232.

8. Trouble Shooting

System Faults Troubleshooting

Troubleshoot system-related faults like Isolation, Ground, Grid, Impedance, and No Utility.

Inverter Failure Faults Troubleshooting

Troubleshoot inverter failures like PV Over Voltage, Consistent, Temperature, Relay, DC Bus, and GFCI.

9. Specifications

DC Input Specifications

Details on DC voltage, current, and MPPT range.

AC Output Specifications

Details on AC voltage, frequency, and power output.

System Specifications

Details on display, efficiency, protection, and operating conditions.

Mechanical Specifications

Details on physical dimensions and weight.

Typical Efficiency Charts vs. Load

10. Regulation & Certificates

Compliance and Standards

List of EMC, Grid Interface, and Low Voltage regulations.

Related product manuals