EN -15-
Screen Saver Mode
Purpose
This mode saves energy by switching o all control panel lighting when the panel
is left inactive.
How To Use?
• This mode will be activated when you press on "MODE" button for 3
seconds.
• If no button is pressed within 30 seconds when he mode is active, lights of the
control panel will go o.
• If you press any button when lights of control panel are o, the current settings
will appear on the screen, and then you can maket he adjument as you want.
If you neither cancel screen saver mode nor press on any button in 30
seconds,
the control panel will go o again.
• To cancel screen saver mode press on "MODE" button for 3
seconds again.
• When screen saver mode is active you can also activate child lock.
• If no button is pressed within 30
seconds after child lock is activated, the lights of the
control panel will turn o. You can see late atus of settings or modes after you pres
any button. While control panel ‘s light is on, you can cancel child lock as described in
the inruction of this mode.
The Child Lock Function
Purpose
Child lock can be activated to prevent any accidental or unintentional changes being
made to the appliance settings.
Activating Child Lock
Press on freezer and cooler buttons simultaneously for 5 seconds.
Deactivating Child Lock
Press on freezer and cooler buttons simultaneously for 5 seconds.
Child lock will also be deactivated if electricity is interrupted or the fridge is
unplugged.
Door Open Alarm Function
If cooler door is opened more than 2 minutes, appliance sounds ‘beep beep’ and door
open icon will be light.
To Next Page
Loading...
Need help?
General
