EN -21-
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
PART - 5.
Transportation and Changing Positioning
• The original packaging and foam may be kept for re-transportation (optional).
• Fasten your appliance with thick packaging, bands or strong cords and follow the
instructions for transportation on the packaging.
• Remove all movable parts (shelves, accessories, vegetable
bins, and so on) or x them into the appliance against shocks
using bands when re-positioning or transporting.
Always carry your appliance in the upright position.
Repositioning the Door
• It is not possible to change the opening direction of your appliance door if door handles
are installed on the front surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles and
models with handles mounted on the sides.
• If the door-opening direction of your appliance can be changed, contact the nearest
Authorised Service Centre to change the opening direction.
BEFORE CALLING YOUR AFTER SALES SERVICE PART - 6.
Errors
Your fridge will warn you if the temperatures for the cooler is at improper levels or if a problem
occurs with the appliance. Warning codes are displayed in the cooler indicators.
ERROR TYPE MEANING WHY WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
E03
E06
E07
E08
Low Voltage
Warning
Power supply to the
device has dropped to
below 170 V.
- This is not a device
failure, this error helps to
prevent damages to the
compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
To Next Page
Loading...
Need help?
General
