AEG STYLE 12 - Setting up Your Phone

5
UK
6 SETTING UP YOUR PHONE
Press the set button to enter the menu and then use up and down buttons to cycle through
the following options:
tSET 1 DATE
tSET 2 LCD
tSET 3 FLASH
Note:
The system will time out if you leave more than 8 seconds between key presses.
6.1 Set time/date
You will need to set the correct time and date so they can be displayed correctly on the display.
If you subscribe to a caller display service, the time and date will be set automatically on receipt of
your first incoming call.
tIn standby mode, press the set button
.
>The display shows “SET 1 DATE“.
tPress the store button
to confirm.
>The “year” icon will be blinking.
tPress the up or down button
to set the year.
tPress the store button
to confirm.
>The “month” icon will be blinking.
tPress the up or down button
to set the month.
tPress the store button
to confirm.
>The “date” icon will be blinking.
tPress the up or down button
to set the date.
tPress the store button
to confirm.
>The “hour” icon will be blinking.
tPress the up or down button
to set the hour.
tPress the store button
to confirm.
>The “minute” icon will be blinking.
tPress the up or down button
to set the minute.
tPress the store button
to confirm the setting.
>The display shows “SET 2 LCD”, you can continue with programming or press the delete button
to return to standby mode.
6.2 Set LCD contrast
tIn standby mode, press the set button
.
>The display shows “SET 1 DATE”.
>Press the up or down button
until the display shows “SET 2 LCD”.
tPress the store button
to confirm.
tPress the up or down button
to select your comfortable display viewing level (1~8).
>The default setting is 4.
tPress store button
to confirm the setting.
>The display shows “SET 3 FLASH”, you can continue with programming or press the delete
button
to return to standby mode.