AEG Voxtel C115 - Setting Up Your Telephone; Setting the Language; Setting Time and Date

7
8 SETTING UP YOUR TELEPHONE
Note:
The system will time out if you leave more than 10 seconds between key presses.
8.1 Set language
With the phone in standby mode;
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up button
to go to the language setting.
>The display shows “SET LANGUAGE“
tPress the OK button
to confirm.
tPress the up
or down button to select “ENGLISH” (default), “FRANCAIS” or “DEUTSCH”.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
8.2 Set time / date
Note:
If you subscribe to the caller display service the time and date will be set automatically, but the year
may still need to be adjusted to ensure the answering machine time stamp gives the correct day.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “SET TIME/DATE”.
tPress the OK button
to confirm.
>The “year“ will be blinking.
tPress the up
or down button to set the year.
tPress the OK button
to confirm.
>The “month” will be blinking.
tPress the up
or down button to set the month.
tPress the OK button
to confirm.
>The “date” will be blinking.
tPress the up
or down button to set the date.
tPress the OK button
to confirm.
>The “hour” will be blinking.
tPress the up
or down button to set the hour.
>When setting the ‘hour it is in 24 hour mode only.
tPress the OK button
to confirm.
>The “minutes” will be blinking.
tPress the up
or down button to set the minutes.
tPress the OK button
to confirm time and date setting.
tContinue with programming, or press the stop button
to return to standby mode.
8.3 Set flash time
You may need the recall function if your phone is connected to a PBX or if you use BT calling features.
Flash is another name for the recall button
R
and the normal UK requirement is for 100 ms, but some
PBX may need a longer time, in which case you can change the setting from the options menu.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “SET FLASH TIME”.
tPress the OK button
to confirm.
tPress the up
or down button to select “100MS” (default), “300MS”, “600MS” or “1000MS”.