To Next Page

To Previous Page

HOW TO USE THE VACUUM CLEANER

PARKING POSITIONS

STARTSTOP THE VACUUM CLEANER

AND ADJUST SUCTION POWER

Open the dust compartment cover. Check

that the dust bag (s-bag) is in place.

Use parking position underneath (A) to

carry and store the cleaner. At the back (B)

when you pause (save your back).

Insert the hose into the cleaner (to remove

it, press the lock buttons and pull). Insert

the hose into the hose handle until the lock

button clicks (to release it, press the lock

button

and pull).

Attach the telescopic tube to the nozzle.

Attach the telescopic tube to the hose

handle (to remove it, press the lock button

and pull). Adjust the telescopic tube by

holding the lock with one hand and pulling

the handle with the other hand.

Pull out the power cord and plug it into the

mains. Press the ON/OFF button to turn the

cleaner on/o.

Adjust suction power. Turn the rotary knob

on the cleaner or use the air valve on the

handle.*

After cleaning, push the REWIND button to

rewind the cable.

Questions and Answers:

Need help?

Do you have a question about the AEG VX7 X POWER and is the answer not in the manual?

AEG VX7 X POWER Specifications

General