What to do if my AEG Vacuum Cleaner robot does not start?
If your AEG Vacuum Cleaner robot isn't starting, it could be due to a couple of reasons. First, check if the dust container is properly placed and the lid is securely closed. Second, ensure the robot is placed on the floor before starting it.
Why there is no charge indication on my AEG RX9 X 3D Vision Vacuum Cleaner?
If your AEG Vacuum Cleaner shows no charge indication, make sure the power cord and adapter are correctly assembled and connected to the mains. Ensure the adapter connector is connected to the charging base and the charging plates on both the robot and base are connected. Also, check the plug and cable for any damage.
Why AEG RX9 X 3D Vision Vacuum Cleaner robot does not move or clean properly?
If your AEG Vacuum Cleaner robot isn't moving or cleaning correctly, there are several potential causes: * The bumper might be stuck. Ensure it moves freely and remove any obstructions. * The right wheel might be stuck. Check that all parts turn freely, clean any entangled threads, and replace damaged brush roll or side brush. * The 3D Vision System could be blocked or dusty. Clean the 3D Vision System and ensure nothing is blocking its sight. * The dust container might be full or blocked. Empty and clean the dust container. * The robot might be operating on a surface that is too slippery. Move the robot and charger to a new location and try again.
How to fix blank display on AEG Vacuum Cleaner?
If your AEG Vacuum Cleaner's display is blank, it's likely because the battery is empty. You should charge the battery.
Why AEG RX9 X 3D Vision Vacuum Cleaner returns to Charging base, but the room is not properly cleaned?
If the room isn't properly cleaned but the AEG Vacuum Cleaner returns to the charging base, it's likely because the robot is going back to charge its batteries. It will automatically continue the cleaning program as soon as the batteries are recharged.
Why AEG RX9 X 3D Vision batteries runs empty fast?
If the AEG Vacuum Cleaner batteries run empty quickly, it is likely that their lifespan has expired. Consider changing the 2 battery packs.
What causes battery problems in AEG Vacuum Cleaner?
If you are experiencing battery related problems with your AEG Vacuum Cleaner, consider the following: 1. Ensure you are using the original AEG Charging base supplied with the robot. If a replacement is needed, use AEG Charging base (ANC: 406000071). 2. If batteries are malfunctioning during use, replace the 2 battery packs. 3. If the product temperature is too high, let the robot paused outside the charging station for 6 hours. 4. Make sure that batteries are properly connected to the robot.
Why is the wrong time displayed on AEG RX9 X 3D Vision Vacuum Cleaner robot?
If the wrong time is displayed on your AEG Vacuum Cleaner robot, it may not have received updated time from the WiFi network. Ensure the robot is connected to WiFi and wait for the time to update. If it doesn't update within 24 hours, redo the onboarding procedure.
How to fix software issue on AEG Vacuum Cleaner?
Please update the AEG Vacuum Cleaner’s software. If the software upgrade has failed, please redo the software update.
What to do if I get a system error on my AEG RX9 X 3D Vision?
If your AEG Vacuum Cleaner is experiencing a system error, try restarting the desired operation. This might resolve the internal error causing the issue.
Covers safe operation, child supervision, environment, and prohibited uses.
Step-by-step guide on how to set up the charging base and robot.
Guides on downloading the app and establishing a connection with the robot.
Details how the robot automatically returns to its charging station after cleaning.
Steps for preparing the cleaning area, including furniture clearance and obstacle removal.
Step-by-step guide to remove and empty the robot's dust container.
Instructions on how to safely replace the robot's internal battery packs.
How to identify and interpret error messages displayed by the robot.
Solutions for blank display, robot not starting, and charging problems.
Troubleshooting for robot movement, navigation, and cleaning effectiveness.
Troubleshooting for 3D Vision system and dust container issues.
Addresses fast battery drain, incorrect charging, and battery connection problems.
General| Brand | AEG |
|---|---|
| Model | RX9 X 3D Vision |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
