To Next Page

To Previous Page

Rinse the inside (dirty side) in lukewarm tap

water. Tap the filter frame to remove the water.

Repeat the process four times. (*

*washable

filter only)

NB: Do not use cleaning agents. Avoid

touching the filter surface. Let the filter dry

completely (min. 24 h in room temperature)

before putting back! Change the washable

filter at least once a year or when it is very

dirty or damaged. After replacing the filter,

close the dust compartment lid until it is

clicked back into place.

Replace the motor filter (AF08) when dirty

or after every 5th s-bag. Push the filter

holder down and pull it out. Exchange the

filter and close the lid.

VACUUMING WITH THE UNIVERSAL

NOZZLE

CLEANING THE UNIVERSAL NOZZLE

CLEANING THE TURBO NOZZLE

Change nozzle setting with the pedal. Icon

illustrates recommended floor type.

Disconnect the nozzle from the tube. Clean

with the hose handle.

Disconnect the nozzle from the tube and

remove entangled threads etc by snipping

them away with scissors. Use the hose handle

to clean the nozzle.*

AEG reserves the right to change products, information and specifications without notice.

Questions and Answers:

Need help?

Do you have a question about the AEG VX7 X POWER and is the answer not in the manual?

AEG VX7 X POWER Specifications

General