Need help?Do you have a question about the AEG WS 11-125 and is the answer not in the manual?
General| Input power | 1100 W |
|---|---|
| Cable length | 4 m |
| Output power | 660 W |
| Power source | AC |
| Spindle thread | M14 |
| Idle speed (max) | 11000 RPM |
| Sound power level | 101.5 dB |
| Cutting depth (max) | 37 mm |
| Sound pressure level | 90.5 dB |
| Grinding disc diameter | 125 mm |
| Vibration level (sanding) | 1.9 m/s² |
| Vibration level (grinding) | 5.8 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
| Product color | Black, Orange, Silver |
| Sound pressure level uncertainty | 3 dB |
Weight and Dimensions| Weight | 2300 g |
|---|
Steps for attaching the auxiliary handle for better control.
Instructions for attaching and adjusting the protective guard.
Demonstrates setting different grinding angles for the tool.
Detailed process for mounting grinding discs and flanges.
Instructions for operating the power switch to start and stop the tool.
Guidance on maintaining optimal grinding angles.
Step-by-step guide to installing the wire brush accessory.
Step-by-step guide to installing a grinding disc accessory.
Specific instructions for disc mounting on WS 11-125 models.
Details on rated input, speed, diameter, weight, and noise levels.
Essential safety precautions for operating the angle grinder.
Safety guidelines for grinding, sanding, and wire brushing.
Explanation of symbols and basic maintenance guidelines.
To Next Page
