AEM Dryflow User Manual

10
j. Place the upper intake pipe in the engine bay as
shown.
k. Secure the throttle/cc cable(s) to the upper pipe with
the zip tie(s) installed earlier. Cut off excess material.
l. Insert the IAT sensor through the grommet in the
upper pipe. Do not push the grommet into the pipe.
m. Install the supplied breather hose between the valve
cover and intake pipe. Secure it with the supplied hose
clamps.

AEM Dryflow Specifications

General

Brand	AEM
Model	Dryflow
Category	Water Filtration Systems
Language	English