Aeon Labs Aeotec MULTISENSOR 6 User Guide

2/26/2018 MultiSensor 6 user guide. : Aeotec by Aeon Labs
https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide- 1/11
MultiSensor 6 user guide.
Modified on: Fri, 17 Nov, 2017 at 9:36 AM
Aeotec by Aeon Labs Multisensor 6.
Aeotec Multisensor 6 has been crafted to power connected lighting using Z-Wave Plus (http://aeotec.com/z-wave-plus). It is powered by
Aeotec’s Gen5 (http://aeotec.com/z-wave-gen5) technology. You can find out more about Multisensor 6 by following that link.
To see whether Multisensor 6 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave gateway
comparison (http://aeotec.com/z-wave-gateways) listing. The technical specifications of Multisensor 6
(https://aeotec.freshdesk.com/solution/articles/6000166772-multisensor-6-technical-specifications-) can be viewed at that link.
Get to Know your MultiSensor.
Your MultiSensor comes packaged with a number of accessories that will help with its installation and operation.
Package Contents:
1. MultiSensor
2. Battery Cover
3. Back-Mount Arm
4. Double-Sided Tape
5. Screws (×2)
6. Micro USB Cable

Aeon Labs Aeotec MULTISENSOR 6 Specifications

General

Product Name	Aeotec Multisensor 6
Manufacturer	Aeon Labs
Category	Accessories
Battery Life	2 years
Light Sensor Range	0 to 1000 Lux
Motion Sensor	Yes
Vibration Sensor	Yes
Wireless Technology	Z-Wave Plus
Sensors	Temperature, Humidity, Light, Motion, Vibration
Motion Detection Range	Up to 5 meters
Motion Detection Angle	120 degrees
Z-Wave Plus	Yes
Power Supply	USB Power Adapter or Battery
Temperature Sensor Range	-10°C to 50°C
Humidity Sensor Range	0 to 100 %
Compatibility	Z-Wave certified