- -3
If you’re using a Minimote:
Decide on where you want your Repeater to be placed and plug it in. Its
main light will begin to blink.
Take your Minimote to your Repeater.
Press the Include on your Minimote.
Press the Action Button on your Repeater.
If your Repeater has been successfully linked to your network, its light
will no longer blink. If the linking was unsuccessful the light will continue
to blink.
Press any button on your Minimote to take it it out of installation mode.
1 .
2 .
3 .
4 .
5 .
6 .
Now that your Repeater is up and running .
Include
To Next Page
Loading...
General