Aeon Labs Aeotec Smart Switch 7 - Explanation of Z-Wave Specific Terms; Z-Wave Specific Terms: Controller vs. Slave; Z-Wave Specific Terms: Inclusion, Exclusion, Association

 Basic
 Clock
 Configuration
 Device Reset Locally
 Firmware Update Md V4
 Manufacturer Specific V2
 Meter V4
 Notification V4
 Powerlevel
 Protection V2
 Scene Activation
 Scene Actuator Conf
 Security
 Security 2
 Supervision
 Switch Binary
 Switch Color
 Switch Multilevel V2
 Transport Service V2
 Version V2
 Zwaveplus Info V2
Controlled Command Classes
 Basic
 Notification V4
 Scene Activation
 Switch Binary
Explanation of Z-Wave specific terms
 Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically
Gateways,Remote Controls or battery operated wall controllers.
 Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators
and even remote controls.
 Primary Controller — is the central organizer of the network. It must be a controller. There can be only
one primary controller in a Z-Wave network.
 Inclusion — is the process of adding new Z-Wave devices into a network.
 Exclusion — is the process of removing Z-Wave devices from the network.
 Association — is a control relationship between a controlling device and a controlled device.
 Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is
able to communicate.
 Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its
capabilities and functions.