Aeotec Smart Switch 6 Manual

1431655765 Reset the product to default factory setting and be excluded from the Z-wave network.
Technical Data
Dimensions 58x58x70 mm
Weight 121 gr
Hardware Platform ZM5101
EAN 1220000013049
IP Class IP 20
Voltage 230 V
Load 3000 W
Device Type On/Off Power Switch
Network Operation Always On Slave
Z-Wave Version 6.51.06
Certification ID ZC10-15080004
Z-Wave Product Id 0x0086.0x0003.0x0060
Supported Command Classes
Switch All
Association
Association Group Information
Basic
Clock
Configuration
Device Reset Locally
Firmware Update Md
Manufacturer Specific
Meter
Powerlevel
Security
Switch Binary
Version
Zwaveplus Info
Controlled Command Classes
Basic
Hail
Switch Binary
Explanation of Z-Wave specific terms
Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated
wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.

Aeotec Smart Switch 6 Specifications

General

Brand	Aeotec
Model	Smart Switch 6
Category	Switch
Language	English