Aeotec Smart Switch 6 User Manual

Smart Switch 6 user guide.
Modified on: Thu, 5 Oct, 2017 at 1:17 AM
Aeotec by Aeon Labs Smart Switch 6.
Aeotec Smart Switch 6 has been crafted to power connected lighting using Z-Wave Plus. It is
powered by Aeotec’s Gen5 technology.
To see whether Smart Switch 6 is known to be compatible with your Z-Wave system or not,
please reference our Z-Wave gateway comparison listing. The technical specifications of Smart
Switch 6 can be viewed at that link.
Get to Know your Smart Switch.

Aeotec Smart Switch 6 Specifications

General

Brand	Aeotec
Model	Smart Switch 6
Category	Switch
Language	English

Summary

Get to Know Your Smart Switch

Quick Start Guide

Adding to Z-Wave Network

General instructions for adding the Smart Switch to your Z-Wave network.

Adding with Existing Gateway

Steps to include the Smart Switch into a Z-Wave network using an existing gateway.

Adding with Z-Stick

Procedure for pairing the Smart Switch to your Z-Wave network using a Z-Stick.

Adding with Minimote

Instructions for adding the Smart Switch to your Z-Wave network using a Minimote.

LED Status and Modes

LED Behavior in ON State

Details on LED color changes based on power output when the switch is ON.

LED Behavior in OFF State

Description of the LED color when the Smart Switch is in the OFF state.

Configurable LED Modes

Guide on how to change the LED behavior modes of the Smart Switch.

Removing from Z-Wave Network

Removing from Existing Gateway

Steps to unpair the Smart Switch from a Z-Wave network via a gateway.

Removing with Z-Stick

Procedure for excluding the Smart Switch from a Z-Wave network using a Z-Stick.

Removing with Minimote

Instructions to remove the Smart Switch from a Z-Wave network using a Minimote.

Advanced Functions

Security Pairing Modes

Guide to pairing the Smart Switch in Advanced Security or Basic Security modes.

Testing Health Connectivity

How to check the Smart Switch's network connectivity health using the LED.

Reset and Firmware Update

Factory Reset

Instructions to reset the Smart Switch to its factory default settings.

Firmware Update

Details and requirements for updating the Smart Switch 6 firmware.

Gateway Specific Configurations

Smartthings Hub Integration

Information on using the Smart Switch with a Smartthings Hub and custom device handlers.

More Advanced Configurations

Overview of additional configurable options available for the Smart Switch.