Smart Switch 7 user guide.
Modified on: Wed, 13 Nov, 2019 at 10:45 PM
Aeotec Smart Switch 7.
Aeotec Smart Switch 7 (http://aeotec.com/z-wave-plug-in-switch) (SS7) has been crafted to power connected lighting using
SmartStart, S2 framework, and Z-Wave Plus (http://aeotec.com/z-wave-plus). It is powered by Aeotec’s S2
(https://aeotec.com/z-wave-s2) technology.
To see whether Smart Switch 7 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave
gateway comparison (http://aeotec.com/z-wave-gateways) listing. The technical specifications of Smart Switch 7
(https://aeotec.freshdesk.com/solution/articles/6000219912-smart-switch-7-technical-specification-) can be viewed at that link.
Get to Know your Smart Switch.
Button Presses and LED reaction.
Button Press Function when released. LED Reaction
Power On
1. (Unpaired from the
network).
-
2. (Paired into the network).
1. Blue LED is flashing.
-
2. LED follows the state of load
(configurable).
QR Code Scan Pairs into Z-Wave network.
Blue LED fast blink during pairing,
then solid blue LED for 2 seconds
to indicate successful pair.
To Next Page
Need help?
General
