EasyManua.ls Logo

AER AG 82 - Safety Instructions

AER AG 82
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
2. Safety instructions
The following guidelines shall help minimize the
risk of injury through re or electric shock.
1. Carefully read these safety notes before you use
the device!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and
additional texts on the unit.
4. Do not install or use your device in close proximi-
ty to water or if you are wet yourself.
5. Use your device in a safe place where nobody can
step on cables or trip over and damage them.
6. Always pull the mains plug before cleaning your
device. Use only a dry cloth for cleaning. Avoid the
use of detergents and do not let any liquids seep
into the unit.
7. Never install your device close to units with
strong electromagnetic elds such as large mains
transformers, revolving machines, neon illumina-
tion etc. Do not lay signal cables parallel to power
current cables.
8. There are no user-serviceable components inside
the unit. To avoid the risk of an electric shock,
the unit must not be opened. All maintenance,
adjustment and repair works should be carried out
by qualied sta only. Any unauthorized tampering
will void the 2-year warranty.
9. In keeping with the EMV regulations screened
cables with correctly tted connectors must be
used for all signal connections.
10. Always use an earthed power supply with the
correct mains voltage. If you are in doubt about
the power outlets ground, have it checked by a
qualied technician.
11. Cable up your device only when it is powered
o.