3
- GLL 10 M: with remote control, louvres oriented by the remote control, IR receiver integrated in
the grille. GLL-M is complete with an electronic thermostat able to manage all the configurations
(heating coil with valve, cooling coil with valve, supplementary or replacement electric heater) as
well as all the functions (heating, cooling, continuous or thermostat-operated ventilation,
dehumidification, timed switch-on or switch-off operations). When working with the electric heater,
the ventilation is only active at maximum and medium speeds. The air filter can be regenerated
with a fire resistance class of V0 (UL 94). The grille is made of plastic, colour RAL 9010.
- GLL 10 R: with remote control, louvres oriented manually, IR receiver integrated in the grille.
GLL-R is complete with an electronic thermostat able to manage all the configurations (heating coil
with valve, cooling coil with valve, supplementary or replacement electric heater) as well as all the
functions (heating, cooling, continuous or thermostat-operated ventilation, dehumidification, timed
switch-on or switch-off operations). When working with the electric heater, the ventilation is only
active at maximum and medium speeds. The air filter can be regenerated with a fire resistance
class of V0 (UL 94). The grille is made of plastic, colour RAL 9010.
- GLL 10: version with louvres oriented manually, must be interfaced with an external control
panel, single or centralised (not included). The working modes are managed from the control
panel. It is necessary to choose a control panel that can manage all the functions and any
accessories that may be installed. The air filter can be regenerated with a fire resistance class of
V0 (UL 94). The grille is made of plastic, colour RAL 9010.
The load-bearing structure, reinforced with a galvanised steel side band, contains insulation
elements in expanded polystyrene obtained from injection moulding for purposes of noise
reduction and air routing.
The condensation drip tray is in one piece, with V0 self-extinguishing level and joined by means of
over-moulding technology to the insulation in expanded polystyrene with flame retardant additive.
The heat exchange coil has a shaped profile to increase the exchange surface.
In the standard version, the unit contains a 3-way valve with a fast connection actuator and visual
signalling of the position; there are also another two versions available, one with a 2-way valve and
the other with no valve. A second valve for 4-pipe systems is available as an accessory in the
versions for systems with fixed or variable flow rates.
The ventilation unit offers particularly quiet operation. It has 3 speeds for the smaller sizes (FCL
32-34-36-38) and 4 speeds for the larger sizes (FCL 42-44-62-64) so you can choose the 3 speeds
that best meet the individual needs of power supplied and quiet operation. The FCL can be set with
continuous fan operation to prevent the layering of room air.
To Next Page
Loading...
Need help?
General
