Need help?Do you have a question about the AERMEC FCL Series and is the answer not in the manual?
General| Type | Fan Coil Unit |
|---|---|
| Power Supply | 230V / 1ph / 50Hz |
| Heat exchanger | Copper tubes with aluminium fins |
| Control | Remote control |
| Filters | Washable air filter |
| Dimensions | Varies by model; refer to technical sheet |
| Weight | Varies by model; refer to technical sheet |
| Installation | Ceiling |
Details the available versions: Standard, V2, and VL, with their characteristics.
Comprehensive description of the FCL cassette-type fan coil's features and installation.
Details the unit's reinforced metal structure and insulation for noise and air routing.
Describes the polystyrene basin and the heat exchange battery design.
Explains the three-way valve and the axial-centrifugal fan unit.
Technical details for the fan motors used in FCL units.
Description of the condensate discharge system with pump and float.
Plate grouping plumbing connections and coil venting for 2-pipe and 4-pipe systems.
Details the GLL range grille unit, its air distribution, and filter.
Description of the electric box, its function and connection type.
Table detailing the dimensions and weights for different FCL models.
Comprehensive technical data including capacities, airflow, sound levels, and electrical ratings.
Lists obligatory grilles, air filters, and optional kits, probes, and valves.
Overview of available control panels and their compatibility.
Details on plumbing connections and condensate discharge piping.
Guidelines for electrical connections and overview of wiring diagrams.
Instructions for setting dip switches for various operational modes and configurations.
Detailed explanation of SW1 and SW2 dip switch functions in FCL configuration.
Control logic diagrams for cooling and heating based on temperature and fan speed.
Logic for electric heater integration and thermostat-controlled ventilation.
Logic for load control based on water probe temperature readings.
Using the remote control for mode selection, temperature, and fan speed.
Auto functioning, timer management, full power, and autostart features via remote.
Step-by-step guide for performing autotests on the unit.
Handling alarms, understanding indicators, and managing alarm logs.
Procedure to display temperature probe values using the infrared receiver.
Safety precautions and essential installation guidelines for technicians.
List of safety and electromagnetic compatibility standards complied with.
To Next Page
