AERMEC FCL Series - Remote Control Operation; Basic Operation and Compatibility

46
Using the system
This section shows the selection of the functioning mode by the user via remote control, and the
configuration of the system by the manufacturer and installer by means of dip switches.
Compatibility of remote controls
The table shows the compatibility between remote controls and board codes and replacements:
CRMC- A698JBEZ
(new)
9111183
CRMC- A360JBEO (old)
9104268
Code 3404200 and subsequent
9114864 FCL ass. board
9114521 board with electric box
Compatible Compatible
Selecting the functioning mode
Remote control settings:
The remote control unit makes it possible to control the following parameters:
 turning the unit on and off
 setting the required temperature
 setting the functioning type, i.e.
- heating
- cooling
- automatic
 programming the Timer for switch-on
or delayed switch-off
 Selecting the speed of the internal fan
(minimum, medium, maximum, automatic)
 positioning of the louvre and swing function
The liquid crystal display on the remote control shows all the selected functioning parameters.
The correct reception of the remote control by the machine is indicated with a beep and brief
flashing of the yellow LED.
For detailed instructions relating to the remote control, refer to the manual.