47
Emergency setting and receiver visualisations
The on-board panel might include:
receiver,
2 pairs of LEDs (yellow/green, red/blue)
AUX key
The blue/red LEDs indicate the machine functioning status (heating/cooling), while the yellow LED
is for the timer.
Yellow LED Red LED Blue LED Status
Machine off
Machine off, timer active and awaiting automatic
start up
Machine functioning in cooling mode
Machine functioning in heating mode
Machine turned on in cooling mode. Timer set for
automatic switch-off.
Machine turned on in heating mode. Timer for
automatic switch-off.
If necessary there is an “AUX” key on the
grille receiver, that activates the "Auto-
Emergency" mode.
In this mode, the machine functions
automatically dependent on the ambient
temperature read the moment the AUX key
is pressed.
Turning off is also via the same “AUX“ key.
(Note: if the Auto-Emergency function is
selected, the functioning of the
Programmer Timer is overridden).
The pressing of the AUX key is indicated
with an acoustic signal.
UX ke
Yellow LED Blue/red LEDs
AUX key
To Next Page
Loading...
