40
18.2.2 INSTRUCTIONS FOR LIFTING
- Before moving the unit make sure
that all the panels are solidly fi xed.
- Use all and only the lifting points indi-
cated.
- Use ropes of equal lengths and suita-
ble for lifting
the weight of the unit.
- Move the unit with caution, without
jerky movements and do not remain
under the unit.
- Movement must be performed by
qualifi ed people with the relative
means in compliance with safety
standards.
NOTE
for the position of the points of implan-
tation of the AVX to make reference
the installation handbook .
To Next Page
Loading...
