Heat recovery units with refrigeration circuit - URX_CF -
4
Selection and installation manual
GB
Remarks
This manual is an integral part of the
documentation enclosed with the unit.
It must be kept for future reference
and must accompany the machine
throughout its life.
The manual defines the purpose for which the
machine has been built and establishes its correct
installation and the limits of its use.
• This manual describes all the use, installation
and maintenance instructions of the subject
unit and the main accident prevention
standards.
• Carefully and thoroughly read all the
information referred to in this manual. Pay
particular attention to the norms accompanied
by the indication “DANGER” or “ATTENTION”
since, if not observed, may cause damage to
the unit or to people.
If any malfunctions are found out, whciha are not
included in this manual, please contact the local
After-Sales Service immediately.
• Aermec S.p.A. declines all liability for any
damage caused by the improper use of the
machine or the partial or superficial reading of
the information contained in this manual.
• Installation and maintenance must be
performed by qualified and experienced
personnel, having the requirements that
are foreseen by law 46/90 and/or the DL
380/2001 for the electrical/electronic
and air-conditioning installation, with
consequent registration at the local
CHAMBER OF COMMERCE, if this is
not so, Aermec S.p.A. declines all
responsibility regarding the safety of
the product.
THE MANUFACTURER DECLINES ALL
LIABILITY FOR DAMAGE TO THINGS OR
INJURY TO PERSONS AND ANIMALS
CAUSED BY THE FAILURE TO OBSERVE THE
INSTRUCTIONS AND STANDARDS IN THIS
MANUAL.
Although suitable risk analysis have been
performed during the design of the URX_
CF unit, PAY ATTENTION to the pictograms
on the machine which help understand the
manual better, rapidly catching the attention
of the reader concerning the risks which
can not be avoided or sufficiently limited
through the use of technical protection
means and measures.
GENERAL HAZARD SIGNAL
Carefully adhere to all the indications
next to the icon.
Failure to comply with the instructions may
generate hazardous situations with possible
damage to the health of the operator and user in
general.
DANGEROUS ELECTRICAL
VOLTAGE SIGNAL
Carefully adhere to all the indications
next to the icon.
The signal indicates components of the unit or, in
this manual, specifies actions that could generate
electrically-related risks.
GENERAL PROHIBITION SIGNAL
Carefully adhere to all the indications
next to the icon that limit actions in
order to guarantee better operator safety.
MAIN WARRANTY
CONDITIONS
• The warranty does not cover payment for
damages cause by the incorrect installation
of the unit by the installer.
• The warranty does not cover payment for
damages cause by the improper use of the
unit by the user.
• The manufacturer is not responsible for
accidents to the installer or user that are
due to the improper use and incorrect
installation of the unit.
The warranty is not valid when:
• the maintenance and repairs have been
performed by unauthorised persons or
companies;
• the unit has been previously repaired or
modified with spare parts that are not
original;
• the unit has not undergone suitable
maintenance;
• the instructions described in the present
manual have not been followed correctly;
• unauthorised modifications have been
made.
N.B.:
The Manufacturer reserves the right at
all times to make any modification for
the improvement of its product and is
not obliged to add these modification
to machines of previous manufacture,
which have already been delivered or
are being built.
The warranty conditions are any subject
to the general sales conditions at the
moment the contract is finalised.
To Next Page
Loading...
Need help?
General
