26
IVEDPY 1902 - 4460510_00
The tables express the useful static pressure at flow and the input power
of the VED fan coils based on the air flow rate and speed of the fan coil, the
speeds refer to 4 power supply voltages.
The motor is set, via the dip switches, to work with the speed increased.
Speed increased: To allow adjusting the static pressure provided by the
fan coil to the duct pressure drops, only on VED_I fan coils it is possible
to increase maximum speed by modifying the settings of the motor dip
switches (see "Installation information" chapter).
FLOW STATIC PRESSURE
VED 030
VED 40
0
10
20
30
40
50
60
70
80
90
0
0,0015
0,0029
0,0044
0,0058
0,0073
0,0087
0,0102
0,0116
0,0131
150 200 250 300 350 400 450 500
88,29 117,72 147,14 176,57 206,00 235,43 264,86 294,29
V1
V2
V3
V4
V5
V6
Air flow rate [m3/h]
Input [Pa]
0
10
20
30
40
50
60
70
80
90
150 200 250 300 350 400 450 500
V2
V3
V1
V4
V5
V6
0
0,0015
0,0029
0,0044
0,0058
0,0073
0,0087
0,0102
0,0116
0,0131
88,29 117,72 147,14 176,57 206,00 235,43 264,86 294,29
Input [Pa]
Air flow rate [m3/h]
To Next Page
Loading...
