30.8
43.0°C
26.0°C
1
°C
ZONE:
MZCUI (1)
26.0°C
OUTDOOR UNIT
1
A B C D
H
I
L
M
G
B
A
E
F
24
I
li
n
EnglishFrançais
c
spaño
OUTDOOR UNIT MENU
View outdoor unit status
In the outdoor unit menu, you can view or set the data for each single out-
door unit (the system can manage up to four). The information available for
each outdoor unit is as follows:
A
Outdoor unit status:
•
: (green) enabled for operation
•
: (grey) OFF
•
: (red) in alarm mode
B
Outdoor unit indicator (between 1 and 4)
C
Active season:
•
: summer (cooling)
•
: winter (heating)
D
In this position, you will see the icons relating to the operation of the
selected outdoor unit:
• outdoor unit off
• outdoor unit in standby
• outdoor unit with only the circulator active
• outdoor unit with the compressor and circulator both active
• outdoor unit in reserve status
• outdoor unit in defrosting phase
• outdoor unit in alarm mode
E
Indicates that the outdoor unit is producing domestic hot water
F
Indicates that the additional heater is active on the outdoor unit
G
Working power of the selected outdoor unit
H
Processed water temperature
I
Setpoint active on the outdoor unit
L
Temperature of the return water
M
Outside air temperature;
The keys along the bottom of the window have various functions:
Navigate the various outdoor units: to select a different outdoor unit,
press the (next) and (previous) keys.
Access the outdoor unit settings page: to access the page, press
Switch the selected outdoor unit on or off: press the key
To return to the previous page, press the key. The homepage will be re-
stored automatically if 5 minutes elapse with no interventions.
Modifying the name associated with the zone (MZC)
In the window for modifying the name of a zone (always identified by its
indicator
A
), you can modify the string identifying the zone (
B
).
To return to the previous page, press the key. The homepage will be re-
stored automatically if 5 minutes elapse with no interventions.
To Next Page
Loading...