Do you have a question about the Aero gc and is the answer not in the manual?
Brand | Aero |
---|---|
Model | gc |
Category | Lawn and Garden Equipment |
Language | English |
Describes how the trap attracts mosquitoes using CO2, heat, and attractant.
Describes how the fan sucks in attracted insects into the collection bag.
Safety instructions related to handling and using gas cylinders with the device.
Safety instructions concerning electrical connections and usage of the device.
Technical specifications related to power, voltage, and current frequency.
Specifications related to controls, modes, and user interface of the device.
Technical specifications for motor power and noise level of the mosquito trap.
Dimensions, mounting methods, and cylinder compatibility for the device.
Details on attraction distance, luring tools, and ways of attraction.
Specifications for the main unit and mobile rack dimensions and weight.
Guidance on selecting the best location and tips for effective system operation.
List of components for the mobile stand assembly of the mosquito trap.
List of components for the main unit of the mosquito trap.
Step-by-step instructions for assembling the mobile rack for the device.
Instructions on how to install the CO2 tank onto the mobile rack.
Guidance on how to securely attach the tank using belts.
Instructions for mounting the main unit onto the mobile rack.
Overview of the device's control panel buttons and indicators.
Explanation of the different operating modes: TIMER, 24H, and BABY.
How to access and adjust settings for CO2 flow, fan, and motor speed.
Details on accessing Gas Control, Fan Mode, Light, Reset, and Timer settings.
Instructions for programming system on/off times and efficiency intervals.
How to activate and configure the gas flow control function for the device.
Procedure for confirming the installation of a new CO2 tank and its settings.
Monthly procedure to check the gas pressure reducer for proper function.
Step-by-step guide for safely replacing the CO2 cylinder.
Advice on monitoring gas levels and using specific attractants for better results.
Instructions on how to clean and empty the mosquito collection bag.
How to safely move the mosquito trap unit with its mobile rack.
Steps for safely replacing the fuse in the device.
Procedure for replacing the internal battery of the control board.
A comprehensive chart listing system errors, causes, and solutions.
Explains error codes displayed on the screen and their meanings.
Describes audible error signals and their corresponding issues.