SERVICE UPON RECEIPT OF MATERIAL
Subject to Export Control, see Cover Page for details. vii
Unpacking
Special-design packing material inside this shipping carton provides maximum protection for the
3500 / 3500A. Avoid damaging the carton and packing material during equipment unpacking. Use
the following steps for unpacking the 3500 / 3500A.
● Cut and remove the sealing tape on the carton top and open the carton.
● Grasp the 3500 / 3500A transit case firmly, while restraining the shipping carton, and lift the
equipment and packing material vertically and place the 3500 / 3500A transit case and end cap
packing on a suitable flat, clean and dry surface.
● Remove the protective plastic bag from the 3500 / 3500A transit case. Place protective plastic
bag and end cap packing material inside shipping carton. Store the shipping carton for future use
should the 3500 /3500A need to be returned.
Checking Unpacked Equipment
● Inspect the equipment for damage incurred during shipment. If the equipment has been damaged,
report the damage to Aeroflex.
● Check the equipment against the packing slip to see if the shipment is complete. Report all
discrepancies to Aeroflex.
To Next Page
Loading...
