Aeroflex PSD60-2R User Manual

OPERATION MANUAL
PSD60-2R
FUEL QUANTITY TEST SET
MANUAL NUMBER:
E6-0597-01 (75322)
REVISION:
A1
DATE:
08/24/2011
WARNING
: INFORMATION SUBJECT TO EXPORT CONTROL LAWS
This document contains controlled technology or technical data under the jurisdiction of the Export Administration
Regulations (EAR), 15 CFR 730-774. It cannot be transferred to any foreign third party without the specific prior
approval of the U.S. Department of Commerce Bureau of Industry and Security (BIS). Violations of these
regulations are punishable by fine, imprisonment, or both.
This document is proprietary to Aeroflex,
and is not to be reproduced or otherwise disseminated without the written consent of Aeroflex.
14408 West 105th Street – Lenexa, KS – 66215-2316
Telephone: (800) 237-2831 / (913) 693-1700 Fax: (913) 324-3103
www.aeroflex.com

Aeroflex PSD60-2R Specifications

General

Brand	Aeroflex
Model	PSD60-2R
Category	Test Equipment
Language	English

Summary

General Safety Precautions

ESD Sensitive Component Handling

Precautions for handling Electrostatic Discharge (ESD) sensitive components to prevent damage.

Safety and Regulatory Information

Hazard Notification Symbols

Explanation of WARNING, CAUTION, and attention symbols used in the manual.

Equipment Markings

Electrical Symbol Guide

Illustrations and descriptions of electrical symbols found on the equipment.

Equipment Markings (Continued)

Terminal and Switch Symbols

Illustrations and descriptions of terminal and power switch symbols used on equipment.

General Warnings and Cautions

Operational and Usage Warnings

Important warnings regarding equipment usage, servicing, cleaning, and explosive atmospheres.

Battery and EMC Notes

Notes on battery type and usage, and details for EMC testing coaxial cable.

ESD Sensitivity Warning

Caution regarding ESD sensitivity and the requirement to use an ESD wrist strap.

Section 1: General Information

Introduction to PSD60-2R

Overview of the Aeroflex PSD60-2R Fuel Quantity Gauging System Test Set and its functions.

Equipment Description and Front Panel

Detailed description of the PSD60-2R test set front panel components and layout.

Specifications and Measurement Ranges

Details environmental specifications, measurement ranges, and accuracy for the test set.

Supplied Accessories

List of accessories provided with the PSD60-2R test set.

Required Unsupplied Equipment

List of equipment referenced in the manual but not supplied with the PSD60-2R.

Section 2: Operation

General Operation Precautions

Important precautions to observe during all operations of the PSD60-2R test set.

Capacitance Measurement Procedure

Step-by-step instructions for performing capacitance measurements using the test set.

Capacitance Simulation Procedure

Detailed steps for simulating capacitance values for TU and COMP on the test set.

Resistance Measurement Procedure

Instructions for measuring electrical resistance using the PSD60-2R test set.

DTF Measurement Procedure

Steps for performing Distance To Fault (DTF) measurements with the test set.

Error Codes

List of error codes displayed by the unit and their meanings or causes.

Section 3: Theory of Operation

General Theory Overview

Details on the theory of operation are available in the PSD60-2R Maintenance Manual.

Section 4: Maintenance

General Maintenance Procedures

Includes cleaning, battery replacement, and calibration procedures for the test set.

Maintenance Documentation

Information on bills of material, drawings, schematics, and test procedures.

Appendix A: Three Terminal Megger

Three Terminal Megger Explanation

Explanation of the three terminal megger and its circuit diagrams for insulation resistance measurement.