Need help?Do you have a question about the Aeroflex ATC-601-2 and is the answer not in the manual?
General| Brand | Aeroflex |
|---|---|
| Model | ATC-601-2 |
| Category | Test Equipment |
| Language | English |
Outlines the manual's structure into chapters and sections for navigation and understanding.
Provides routine maintenance instructions for cleaning and inspecting the Test Set.
Details inspection steps for chassis, capacitors, connectors, circuit boards, resistors, semiconductors, and wiring.
Explains the operational principles of the ATC-601-2 at system, functional, and module levels.
Explains interrogation processes (Background, Mode, Test) for transponder testing and diagnostic verification.
Provides detailed descriptions of individual assemblies like Power Supply, Digital IF PC Board, and Voltage Inverter.
Describes the components and operation of the front panel pulse PC board assembly.
Explains the circuits for LCD data control, contrast, and backlight, ensuring proper display operation.
Provides instructions for removing and disassembling assemblies within the ATC-601-2.
Covers essential tools required and important precautions for safe disassembly and reassembly.
Lists and describes the pin assignments for various I/O connectors on the ATC-601-2.
Defines the symbolic notation and operators used in PAL equations for clarity.
Details the PAL equations for Digitizer Control and LCD Control, including pin assignments.
Illustrates the timing diagrams for wait states in the system interface PAL for read and write cycles.
Specifies the output frequency, level, test antenna, gain, and range for the signal generator.
Defines the spacing, widths, rise/fall times, phase modulation, and amplitude levels for various pulse modes.
Lists the specifications for UUT XMTR Frequency, Power, Receiver Sensitivity, Reply Delay, and Reply Jitter.
Provides a detailed description of each control, connector, and indicator on the front panel.
To Next Page
