Aeroflex GPS-101-2 User Manual

Global Positioning Simulator
Operation Manual
1002-1004 -200
Issue-4
GPS-101-2
EXPORT CONTROL WARNING: This document contains controlled
technology or technical data under the jurisdiction of the Export
Administration Regulations (EAR), 15 CFR 730-774. It cannot be
transferred to any foreign third party without the specific prior
approval of the U.S. Department of Commerce Bureau of Industry and
Security BIS). Violations of these regulations are punishable by fine,
imprisonment, or both.
To buy, sell, rent or trade-in this product please click on the link below:
https://www.avionteq.com/IFR-Aeroflex-GPS101-2-GPS-Satellite-Simulator
www.avionteq.com

Aeroflex GPS-101-2 Specifications

General

Brand	Aeroflex
Model	GPS-101-2
Category	Test Equipment
Language	English

Summary

Introduction

Manual Organization

Details the structure and organization of the operation manual into chapters and sections.

Section 1: Description

General Overview

Provides a general description and functional capabilities of the GPS-101-2.

System Operation

Explains how GPS receivers operate and interact with the GPS-101-2.

Functional Capabilities

Details the specific functions and features of the GPS-101-2 simulator.

Section 2: Operation

Installation and Safety Precautions

Covers installation, power management, and critical safety precautions for operating the GPS-101-2.

Controls, Connectors, and Indicators

Details the front and rear panel controls, connectors, and indicators of the GPS-101-2.

Performance Evaluation

Describes how to perform self-tests and evaluate the operational capability of the GPS-101-2.

Operation Procedures

Guides through the main menu and standard operation procedures for GPS receiver testing.

Remote Operation

Explains how to control the GPS-101-2 remotely using RS-232 commands.

Section 3: Specifications

Generator Specifications

Details the frequency, accuracy, and output parameters of the signal generator.

Timebase Specifications

Covers standard and optional timebase frequencies, uncertainties, and stability.

Antenna Coupler Specifications

Provides coupling and isolation details for the antenna coupler.

Power and Fuse Requirements

Outlines AC requirements, power consumption, battery times, and fuse ratings.

Shock, Vibration, and Environmental Specifications

Details shock, vibration compliance, and operational environmental considerations.

Section 4: Shipping

Shipping Information and Authorization

Covers requirements for returning test sets for service, including authorization and tagging.

Repacking Procedure

Provides step-by-step instructions for properly repacking the test set for shipment.

Section 5: Storage

Storage Precautions

Outlines necessary precautions for storing the test set for extended periods.

Appendix A: I/O Connectors and Pin-Out Tables

I/O Connector Overview

Lists and describes the various connectors on the GPS-101-2 unit.

COMM-1 Connector Pin-Out

Details the pin assignments for the COMM-1 D-Sub connector.

AUX I/O Connector Pin-Out

Details the pin assignments for the AUX I/O D-Sub connector.

COMM-2 Connector Pin-Out

Details the pin assignments for the COMM-2 D-Sub connector.

Appendix B: NAV Data and Almanac Information

NAV Data Information

Explains NAV data frames, almanac structure, and the importance of almanac updates.

Test Patterns

Details the available test patterns (T1, T2, T3) for GPS receiver testing and their usage.

Almanac Procedures

Covers obtaining, uploading, and downloading almanac data for the GPS-101-2.

Appendix C: Auxiliary Equipment

Included Auxiliary Equipment

Lists and illustrates the auxiliary equipment provided with the GPS-101-2.

Appendix D: Conversion Tables

Metric/Imperial and Nautical Conversions

Provides conversion factors for metric, imperial, and nautical units.

Appendix E: Abbreviations

List of Abbreviations

Defines common abbreviations used throughout the operation manual.

Battery/Voltage Instructions

Battery Replacement

Provides instructions for replacing the internal battery of the GPS-101-2.

Disconnecting Battery

Details the procedure for disconnecting the battery for long-term storage.

Line Supply Voltage Select Switch

Explains how to change the line supply voltage setting for different power sources.