Aeroflex 3500A - Page 254

C-12 Subject to Export Control, see Cover Page for details.
C-4. REMOTE OPERATION COMMANDS (cont)
Audio Level Meter (cont)
COMMAND RANGE DESCRIPTION
:alm:reading:avg? 0.0 to 50.0 Returns Audio Level Meter reading with
averaged value.
:alm:reading:clear Clears the meter readings.
:alm:reading:max? 0.0 to 50.0 Returns Audio Level Meter reading maximum
value.
:alm:reading:min? 0.0 to 50.0 Returns Audio Level Meter reading minimum
value
:alm:reading:val? 0.0 to 50.0 Returns Audio Level Meter average value.
:alm:scale 1 - 40 V max
2 - 2 V max
Sets hardware input scaling for the DVM
connector.
:alm:scale? Returns hardware input scaling for the DVM
connector.
:alm:source 0 - AUD IN
1 - DVM
Sets input signal selection.
:alm:source? Returns input signal selection.
:alm:state 0 - Disable
1 - Enable
Sets Audio Level Meter state.
:alm:state? Returns Audio Level Meter state.
:alm:units 0 - V
1 - mV
2 - dBμV
3 - dBm
4 - W
Sets current units setting.
:alm:units? Returns current units setting.
:alm:zero Activates DC offset compensation for the DVM
input.
:alm:zero? Returns DC offset compensation for the DVM
input.