Aerogen Aeroneb Pro - Page 47

Aeroneb
®
Professional Nebulizer System Instruction Manual 41
Representative particle size distribution for Albuterol as per EN 13544-1
is shown below:
Power
Power source: can operate from AC/DC adapter (input 100 to 240 VAC
50 – 60 Hz, output 9 V) or internal rechargeable battery (4.8 V nominal
output).
Note: The Aeroneb Pro control module is approved for use with Aerogen
AC/DC adapter AG-AP1040-xx*
(Manufacturer Reference: FRIWO FW7660M4/09)
Power consumption: < 6.5 Watts (charging),  2.0 Watts (nebulizing).
Patient isolation: control module circuitry provides 4 kilovolt (kV)
patient isolation and complies with IEC/ EN 60601-1.
* Consult your local representative for the order code extension specific
to your country.
0%
20%
40%
60%
80%
100%
0.1 1 10
Cumulative undersize %
Particle size (microns)