Aerohive AP122 - Hardware Specifications; Radio Specifications

Hardware Specification
s
The following specifications describe the physical features and hardware components, the power
adapter and PoE electrical requirements, and the temperature and humidity ranges in which the
devices can operate.
Radio Specifications
802.11a
•
5.150-5.850 GHz operating frequency
• Orthogonal Frequency Division Multiplexing (OFDM) modulation
• Rates (Mbps): 54, 48, 36, 24, 12, 9, 6 with auto fallback
802.11b
• 2.4-2.5 GHz operating frequency
• Direct-Sequence Spread-Spectrum (DSSS) modulation
• Rates (Mbps): 11, 5.5, 2. 1 with auto fallback
802.11g
• 2.4-2.5 GHz operating frequency
• Orthogonal Frequency Division Multiplexing (OFDM) modulation
• Rates (Mbps): 54, 48, 36, 24, 12, 9, 6 with auto fallback
802.11n
•
2.4-2.5 and 5.150-5.850 GHz operating frequency
• 802.11n modulation
• Rates (Mbps): MCSO - MCS15 (6.5 Mbps - 300 Mbps)
• 2x2 MIMO radio
•
HT20 and HT40 (5GHz) High-Throughput (HT) support
• A-MPDU and A-MSDU frame aggregation
802.11ac
•
5.150-5.850 GHz operating frequency
• 802.11ac modulation (256-QAM)
• Rates (Mbps): MCSO - MCS9(6.5 Mbps - 867 Mbps), NSS = 1-2
• 2x2 stream MIMO radio
• VHT20/VHT40/VHT80 support
Device Specifications
• Chassis dimensions: 6.63” W x 2” H x 6.63” D (16.8 cm x 5 cm x 16.8 cm)
• Weight: 1.16 lbs (0.53 kg)
•
Two internal 802.11b/g/n 2.4 GHz antennas , and two internal 802.11a/b/g/n/ac 5GHz
antennas
Page 1
3
of 1
4
AP122 Hardware User Guid
e
11
/
14
/
201
6