Aerohive AP230 User Manual

Page 1 of 18
Aerohive AP230 User
Guide
The Aerohive AP230 has two radios tha t can operate in 802.11a/b/g/n/ac modes with opti ona l Frame Burs t support across all modes . The AP230
s u pports t h ree 802.11n MIMO stream s and three 802.11ac/n MIMO stre am s s imul t aneo usly. The maximum data rates are up t o 450 Mbps in the 2.4
GHz 802.11n/g mode, up to 600 Mbps in the 2.4 GHz 802.11n mode with TurboQAM enabled, and 1.3 Gbps in the 5 GHz 802.11ac mode. Both
radio s a l so support l e ga cy 802 . 11a /b/ g wireless. The AP230 has two 10/100/1000 Mbps Ethernet ports. These devices pro v i d e multi -function
capabilities including high throughput and strong security.
Regulatory Compliance Sta t ement s
The regulatory compliance statements in this section apply to Aerohive AP230 devices.
For Japan, the AP230 is re str i cte d for indoor use in the 5150-5350 MHz band onl y .
Compliance Statements
The following co mp li anc e inf o rm a t io n a ppli e s to the A P 230 .
AP230 Compliance Statement - Europe

Aerohive AP230 Specifications

General

2.4 GHz	Yes
Modulation	256-QAM, DSSS, OFDM
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1300 Mbit/s
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	3
Internal	No
Placement	Ceiling, Table, Wall
Product color	White
Security algorithms	802.1x RADIUS, TKIP, WEP, WPA, WPA2
Output current	2 A
Output voltage	12 V
AC input voltage	100 - 240 V
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	0 - 40 %
Antenna features	Integrated antenna
Antenna gain level (max)	6 dBi

Weight and Dimensions

Width	184.15 mm
Weight	730 g

Summary

Declarations and Statements

EU Declaration of Conformity

Device compliance with essential requirements of the R&TTE Directive 1999/5/EC and applicable test methods.

FCC Interference Statement

Statement regarding FCC rules compliance and potential radio frequency interference.

Installation and Mounting

Connectivity and Hardware

Connecting the AP230

Steps to connect the AP230 to power and the network.

Hardware Components

Overview of the physical parts and their functions.

Hardware Specifications

Device Specifications

Physical dimensions, weight, and antenna details of the AP230.

Power Specifications

Electrical requirements for AC/DC adapter and PoE.