Aeropro RHF9021 User Manual

1
Framing Nailer RHF9021
OPERATING INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED
AIR
AIR-POWERED 3-1/2” FRAMING NAILER
Model No.: RHF9021
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool’s construction and design:
 Damage to hearing if effective hearing protection is not worn.
 Health defects resulting from vibration emission if the power
tool is being used over longer period of time or not adequately
managed and properly maintained.
 Wear eye protection.
2017
IMPORTANT:
Read all safety rules and operating Instructions carefully
before first use it. Keep this Manual for future reference.
TABLE OF CONTENTS:QUICK START GUIDE
 TECHNICAL SPECIFIACTIONS
 SAFETY GUIDELINES
 KEY PARTS DIAGRAM
 IMPORTANT INFORMATION
 TYPES OF FASTENERS
 OPERATING INSTRUCTIONS
 MAINTENANCE
 TROUBLESHOOTING
 EXPLODED VIEW
 PARTS LIST
WARRANTY

Aeropro RHF9021 Specifications

General

Brand	Aeropro
Model	RHF9021
Category	Nail Gun
Language	English

Summary

Technical Specifications and Safety

Safety Guidelines

General safety information and symbols used in the manual.

Personal Safety

Precautions for the personal safety of the user and others.

Key Parts Diagram and General Use

Eye and Ear Protection

Emphasizes wearing safety glasses and ear protection for user safety.

General Use and Air System

Details on nailer usage, housing, handle, and air system requirements.

Types of Fasteners

Operating Instructions

First Time Operation Preparation

Steps for initial setup and readiness before using the tool.

Compressed Air System Connection

Guidelines for safely connecting the tool to the air supply.

Tool Handling and Operation

Proper techniques for operating and handling the nailer during use.

Clearing Jammed Fasteners

Step-by-step instructions for safely removing jammed fasteners.

Maintenance

Troubleshooting

Explosive View and Parts List