ENGLISH
13
¾ Place the appliance in the charging unit. It positions
itself and starts charging. The red charging
indicator 1 is always on when the appliance is charg-
ing. Make sure the On/Off switch 4 is in the 0 position
when charging.
To maintain the charging capacity of the battery we
recommend occasionally draining the battery until
the motor stops.
3.2 Storing the power cable
¾ Insert the mains adapter 8 in a
power socket.
¾ Place the charging unit 2 on a
flat surface.
If you do not need the full length of
the cord, part of it can be stored in
the cable storage compartment 9.
¾ Pull out the mains plug.
¾ Turn the charging unit upside
down.
¾ Wind the excess cable round the
holder in the base, then run the
cable through the small recess in
the housing to the outside.
To Next Page
Loading...
