Aesculap Exacta - Operating the Trimmer; Switching On and Off; Comb Attachment Usage

ENGLISH
14
4. Operation
4.1 Switching On and Off
4.2 Comb attachment
The further you push the comb attachment onto the
blade set, the shorter the cutting length.
5. Cleaning and care
To ensure proper functioning and full performance from
your trimmer, clean and oil the appliance regularly.
Cleaning the blade set
¾ To switch the appliance on, slide
the On/Off switch 4 forward.
¾ To switch the appliance off, slide
the On/Off switch to position 0.
¾ Switch off the trimmer and slide
the comb attachment onto the
blade set until it snaps into place.
You can now start trimming hair
with the trimmer in the usual way.
¾ The comb attachment can be ad-
justed to 4 different cutting
lengths (approx. 3 to 6 mm). To
do so, push it to the required po-
sition on the blade set.
WARNING
Damage to the clipper head caused by its
removal!
¾ Never remove the clipper head. Once
removed it cannot be reattached.