Aesculap GA800

To Next Page

To Previous Page

19 20 21

22232425

GA810GA808

Document No.: IFU - Version: 3.0 - Document ID: SOP-AIC-5001568 Date/Time Printed/Viewed: 2022-04-13 15:59 (CET)

Effective

Main Page

Table of Contents8
About this Document9
Scope9
Warnings9
General Information9
Intended Use9
Application Environment9
Indications9
Contraindications9
Safe Handling9
Product Description10
Scope of Supply10
Components Required for Operation10
Operating Principle10
Control Unit10
Display/Control Concept10
Explanation with an Example10
Applied Part Types11
Identification of Control Elements on System Components11
Recognition of Connected Motor Cable and Applied Part11
Overload Protection11
Coolant and Irrigation Pump11
Preparation and Setup11
Set-Up Environment/Set-Up Location11
Stacking of Units11
Working with the ELAN 4 Electro System11
System Set-Up11
Connecting the Power Supply12
Switching on the Control Unit12
Switching off the Control Unit12
Putting out of Operation12
Connecting the ELAN 4 Electro to Wireless Foot Control GA81012
Connecting the ELAN 4 Electro Foot Control GA808 to the Control Unit12
Connecting the ELAN 4 Electro Motor Cable GA804/GA805/GA806 or ELAN 4 Electro Drill Tool GA844 to Control Unit13
Connecting the ELAN 4 Electro Single-Use Tube Set GA395SU13
Connecting the Applied Part to the Motor Cable13
Releasing the Applied Part for Operation ("On" Position)14
Locking the Applied Part ("Off" Position)14
Disconnecting the Applied Part from the Motor Cable14
Disconnecting the ELAN 4 Electro Foot Control GA808 from the Control Unit14
Disconnecting the ELAN 4 Electro Motor Cable GA804/GA805/GA806 or ELAN 4 Electro Drill Tool GA844 from Control Unit14
Function Checks14
Safe Operation14
Activating the Motor/Pump Control Panel15
Changing the Maximum Speed Setting/Rotational Direction of15
The Applied Part15
Activating the Coolant and Irrigation Pump/"Flush" Function (Continuous Flushing)15
Deactivating the Coolant and Irrigation Pump and Changing the Delivery Rate15
Enable Application Part Using Foot Control GA808 or Wireless Foot Control GA81016
Activating the Applied Part Via Hand Control GA804/GA80516
Activating the Coolant Pump Via Foot Control16
System Settings Menu16
User Profiles17
Motor Settings17
Device Settings18
Wireless Foot C1Ontrol18
Device Information18
Reprocessing Procedure18
General Safety Notes18
Reusable Products19
Preparation before Cleaning19
Cleaning/Disinfection19
Product-Specific Safety Instructions for the Reprocessing Procedure19
Wipe Disinfection for Electrical Equipment19
Inspection, Maintenance and Checks19
Maintenance19
Troubleshooting List20
Display Error Messages20
System Error20
Accessory Error20
Operating Error21
Other Faults in Control Unit22
Faults When Working with the Applied Part22
Fuse Replacement24
Technical Service24
Accessories/Spare Parts24
ELAN 4 Electro Motor Cables, Applied Parts and Foot Controls24
Coolant and Irrigation Pump25
Power Cord25
Equipotential Bonding Leads25
Spare Parts25
Technical Data25
Classification According to Directive 93/42/EEC25
Performance Data, Information about Standards25
Ambient Conditions26
Disposal26
Distributor in the Us/Contact in Canada for Product Information and Complaints26

Aesculap GA800 - Page 3

Table of Contents

Related product manuals