AFG 7.3AR - Page 19

19
7.3AU ASSEMBLY STEP 4
A Open HARDWARE FOR STEP 4.
B Feed the HANDLBAR WIRES (13) through the
hole in the CONSOLE MAST (11) and out the top
of the CONSOLE MAST (11).
C Attach the HANDLEBARS (14) to the CONSOLE
MAST (11) using 4 BOLTS (G), 4 SPRING
WASHERS (C) and 4 FLAT WASHERS (B).
D Attach the HANDLEBAR COVER (15) to the
CONSOLE MAST (11) using 2 SCREWS (H).
E Attach the WATER BOTTLE HOLDER (16) to the
CONSOLE MAST (11) using 2 SCREWS (H).
11
13
14
B
C
G
11
H
16
15
H
t
7.3AU
NOTE: Be careful not to pinch any wires
while attaching the handlebars.
HARDWARE FOR STEP 4
PART TYPE QTY
G BOLT 4
B FLAT WASHER 4
C SPRING WASHER 4
H SCREW 4
AFG14_7.3AR_AU_OM_r1_5.indd 19 5/12/14 11:13 AM