TWIN
OPEN BED FRAME
READY
ASSEMBLE
TO
Page 2 of 2
Attach open bed frame to the headboard as shown below
using 4 JCB M8 X 15mm bolts that are supplied with your
headboard. Tighten with the Allen wrench M6 (E).
Attach 2 slat kit (5) to the open bed as shown below using wood screws 1 1/4" (D). Tighten with Phillips head
screw driver. (customer supplied)
Step 3
Step 4
D
Congratulations!
Your bed is now ready for use.
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
D
Wood screw 1 1/4"
JCB M8 X 15mm
5
5
C
To Next Page
Loading...
