AFi Atlantic TWIN User Manual

ASSEMBLY INSTRUCTIONS
TWIN
Before assembling your bed frame, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Barrel nut - 2 pcs
JCB M8 X 15mm ( 5/8") - 4 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs Wood screw(1 1/4”) - 24 pcs
Spare - 1 pc
Spare - 2 pcs
OPEN BED FRAME
Page 1 of 2
PARTS LIST HARDWARE
FOOT RAIL 1 PC
A
D
E
F
B
C
1 PC
1 PC
2 PCS
2 SETS
LEFT LEG
RIGHT LEG
SIDE RAIL
SLAT KIT
1
2
3
4
5
Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
Spare - 1pc
4
4
1
1
2
3
B
B
A
A
B
C
C
C
C
A
Attach the legs (2) and (3)
to foot rail (1), using
JCB M6 X 110mm (A) and
barrel nut (B).
Tighten with the Allen wrench M4 (F).
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach side rails (4) to the foot rail (1) as shown below using JCB M8 X 15mm (C).
Tighten with Allen wrench M6 (E).
Step 1
Step 2
READY
ASSEMBLE
TO
PO:
Adult assembly
JCB M6 X 110mm
Barrel nut
JCB M8 X 15mm

AFi Atlantic TWIN Specifications

General

Brand	AFi
Model	Atlantic TWIN
Category	Indoor Furnishing
Language	English

Summary

Open Bed Frame Assembly

Step 1: Attach Legs to Foot Rail

Attaching legs (2, 3) to foot rail (1) using M6x110mm bolts (A) and barrel nut (B).

Step 2: Attach Side Rails

Attaching side rails (4) to foot rail (1) using M8x15mm bolts (C).

Step 3: Attach Frame to Headboard

Connecting the assembled bed frame to the headboard using M8x15mm bolts (C).

Step 4: Install Slat Kit

Securing the slat kit (5) to the bed frame using wood screws (D).

Bed Drawer Assembly

Step 1: Prepare Drawer Face and Sides

Laying out drawer face (02) and attaching drawer sides (03) with M6x1" bolts (A).

Step 2: Insert Drawer Bottoms and Middle

Guiding drawer bottoms (05) and middle (06) into grooves and attaching center support (07).

Step 3: Attach Drawer Back

Connecting the drawer back (04) using M6x1" bolts (A) and wood screws (B).

Step 4: Insert Drawer into Bed

Final step of inserting the assembled drawer into the main bed structure.