To Next PageTo Next Page
Need help?Do you have a question about the AFi NANTUCKET MURPHY and is the answer not in the manual?
Lists all necessary hardware components with quantities and spares for assembly, including dowels, screws, nuts, and tools.
Illustrates and labels all furniture parts required for the Murphy bed assembly, such as side panels, top panel, and drawer base.
Guides initial assembly steps including inserting wooden dowels and attaching side panels to the drawer base using screws.
Details the process of guiding the back panel and installing the middle back rail to form the main structure.
Covers attaching the top panel and installing functional hardware like metal pulls and door hinges.
Explains how to lift, fold, close, and latch the main door to the side panels for secure storage.
Guides the opening of the folding mechanism, attaching support brackets, and installing the folding mattress.
Provides instructions for the final cabinet closure and recommends a safety check of all secured parts.
This document provides assembly instructions for the Nantucket Murphy Bed with Charging Station, a twin-sized furniture piece designed for adult assembly. The manual emphasizes careful reading of instructions and familiarization with parts before beginning assembly. It also includes contact information for customer service in case of damaged or defective items.
The assembly process is broken down into 13 steps, each with clear illustrations and textual guidance. The first step involves inserting wooden dowels into locator holes on specific panels, ensuring proper alignment for subsequent steps. Step 2 details attaching the left and right side panels to the drawer base, using JCB screws and an Allen wrench for tightening. This step is crucial for establishing the main structure of the bed.
Step 3 focuses on carefully guiding the back panel into its grooves, ensuring it fits fully into the top panel base. This step is important for the structural integrity and stability of the bed. Step 4 involves guiding the middle back rail into its grooves, using JCB screws and barrel nuts, tightened with an Allen wrench. This further reinforces the back structure.
Step 5 combines guiding the back panel into the middle back rail's groove and attaching the top panel to the cabinet assembly, again using JCB screws and an Allen wrench. This step brings together major components of the bed's frame.
Step 6 describes installing the metal pulls onto the door panels using metal pull screws and washers, tightened with a Phillips screwdriver. This step adds the functional handles to the doors. Step 7 instructs the user to lay the door down flat and attach the door hinge to the drawer base using wood screws and a Phillips screwdriver, emphasizing the importance of aligning the door with the side panels.
Steps 8 and 9 detail the mechanism of the Murphy bed. Step 8 shows how to lift and fold the door, then lift and latch it to the side panel. Step 9 illustrates pushing the door closed and latching both sides, demonstrating the bed's compact storage feature.
Step 10 involves attaching triangle brackets to the back of the cabinet using wood screws and a Phillips head screwdriver, providing additional stability and support. Step 11 guides the user to pull the drawer out fully, unlatch the door, and open it, folding it down as shown, preparing the bed for use.
Finally, steps 12 and 13 involve installing the folding mattress onto the bed and then opening the top panel and pushing the drawer base in, respectively. The manual concludes with a "Congratulations!" message, indicating that the Murphy bed is ready for use, and a recommendation to recheck all screws and parts for tightness and security to ensure lasting safety.
The manual includes a detailed parts list with numerical identifiers for each component, such as hardware, top panel, left side panel, right side panel, door, back panel, middle back rail, drawer base, and folding mattress. It also provides a hardware list with illustrations and quantities for each item, including spare hardware in case of damage during assembly. The hardware includes wood dowels, various JCB screws, wood screws, barrel nuts, metal pulls, metal pull screws, washers, an Allen wrench, and triangle brackets.
Throughout the manual, icons are used to indicate "Adult assembly" and the specific tools required for each step, such as a Phillips screwdriver (customer supplied) and the included Allen wrench. The illustrations are clear and depict the assembly process from various angles, including bottom views where necessary. The overall design of the manual is user-friendly, aiming to guide the assembler through each stage efficiently and safely.
General| Category | Indoor Furnishing |
|---|---|
| Type | Murphy Bed |
| Brand | AFi |
| Model | NANTUCKET |
| Material | Wood |
