4
Press and hold to activate
Press and release to activate
YY
Secondary function of a key
XX
Primary function of a key
Dual Function Keys Legend
Power key - Press and hold until all indicators light up to turn OLS On/Off.
Wavelength/CW select key
Press to select multimode single or dual Wave ID wavelengths •
Press and hold to switch to the CW mode at the currently transmitted •
wavelength, then press the key to toggle between wavelengths
Refer to keys and indicators that are applicable to your OLS light source model.
Low Battery indicator - Lights up when a Low Battery condition exists;
batteries require replacement
External Power indicator - Lights up, whether the unit is on or off, when
the correct AC power adapter is connected
9V
850nm
CW
1300nm
Active Output indicators - Light up when the corresponding output port
is ON
Single or dual Wave ID - ON continuous light •
CW - ON blinking light •
OLS1-Dual LED Light Source Keys and Indicators
Keys and Indicators common for all models
OLS Series Light Sources
850nm
1300nm
To Next Page
Loading...
