Need help?Do you have a question about the AFL Noyes OPM5 and is the answer not in the manual?
General| Model | OPM5 |
|---|---|
| Manufacturer | AFL Noyes |
| Category | Test Equipment |
| Type | Optical Power Meter |
| Wavelength Range | 800 nm to 1700 nm |
| Detector Type | InGaAs |
| Resolution | 0.01 dB |
| Display | LCD |
| Wavelengths | 850 nm, 1300 nm, 1310 nm, 1550 nm, 1625 nm |
| Accuracy | ±0.2 dB |
| Connector | FC, SC, ST |
| Storage Temperature | -20 to +70 °C |
Overview of the User's Guide purpose.
Contact details for technical and sales support.
Procedures for receiving and checking equipment for damage.
List of necessary accessories for connecting instruments.
Detailed description and illustration of the OPM4 model's ports and display.
Explanation of primary and secondary key functions on the OPM4.
Procedures for setting references and understanding OPM4 power-up and auto-off display screens.
Detailed explanation of OPM4 test mode display elements and indicators.
Explanation of OPM5 physical ports, display elements, and new features.
Explanation of OPM5 key functions and mode switching.
Procedures for setting references and storing measurements on OPM5.
Detailed explanation of OPM5 test mode display elements and indicators.
Instructions for managing files and fibers using the OPM5 File Manager.
How to view stored references and store measurements on OPM5.
Viewing and managing stored test records using the OPM5 Recall Mode.
Procedures for editing stored records and clearing files/fibers on OPM5.
Description of OLS1-Dual LED light source features, ports, and indicators.
Detailed operation of the OLS1-Dual, including power, wavelength, and mode selection.
Description of OLS2-Dual laser source ports, indicators, and key features.
How to enable and use the output adjust feature on the OLS2-Dual.
Switching between WAVE ID, CW, and Tone modes on the OLS2-Dual.
Description of OLS4 light source ports, indicators, and key features.
How to select wavelengths and control tone modes on the OLS4.
Description of OLS7-3 triple wavelength source ports, indicators, and features.
How to select modes and wavelengths on the OLS7-3.
Description of OLS7-FTTH triple wavelength source ports, indicators, and features.
How to select modes and wavelengths on the OLS7-FTTH.
Step-by-step guide to measure optical power using an OPM.
Procedure to set a reference for multimode link testing using one jumper.
Verifying the insertion loss of test jumpers for multimode links.
Measuring the insertion loss of a multimode link.
Procedure to set a reference for single-mode link testing using one jumper.
Verifying the insertion loss of test jumpers for single-mode links.
Measuring the insertion loss of a single-mode link.
Instructions for cleaning OPM and OLS optical ports using various methods.
Information on recommended repair and calibration services for NOYES equipment.
Steps for replacing the batteries in NOYES test instruments.
To Next Page
