20
OLS2-Dual features
1. Power key - Press and hold the key until all indicators light up to turn the OLS2-Dual On or Off. The
instrument turns on in its last operating condition it was in prior to being turned off.
2. Power port (located on the top panel) - This is the interface for an AC power adapter.
3. External Power indicator - Lights up, whether the unit is on or off, when the correct AC power
adapter is connected.
4. Low Battery indicator - Lights up when a Low Battery condition exists; batteries require
replacement.
5. Output port - Universal Connector Interface (UCI). Accepts swappable SC connector (ST, FC, and LC
connector styles are available).
6. Active Output indicators - The Active Output indicators light up when the corresponding output port
is on.
7. Wavelengths -l key - Wavelength select key changes the active output wavelength(s) as indicated
below for each operational mode.
OLS2-Dual Laser Source
270Hz
330HZ
1KHz
2KHz
CW
Wave ID
Optical Laser Source
Output
Adjust
1310nm
1550nm
9V
Mode
λ
OLS2 DUAL
NOYES
Mode key
Output Adjust keys
Power key
Wavelengths- l key
Low Battery
indicator
Active Mode
Indicators
Active Output
indicator
Output port
6
10
9
8
7
1
4
5
Power port
External Power
indicator
2
3
To Next Page
Loading...
