What to do if my Afore BNT020KTL displays GridF.OutLim?
If your Afore Inverter displays GridF.OutLim, it indicates the grid is fluctuating or the grid frequency is outside the set range. Once the grid returns to normal, the inverter will restart automatically. Verify that the inverter frequency setting range is correct and ensure the AC output wiring is securely connected.
Why does my Afore Inverter show GridV.OutLim?
If your Afore Inverter displays GridV.OutLim, it means the grid is fluctuating or there's a voltage unbalance between phases. The inverter will automatically restart once the grid returns to normal. You can also check each phase's voltage via the inverter LCD.
General| Max. DC Voltage | 1100 V |
|---|---|
| MPPT Voltage Range | 200-1000 V |
| Number of MPPTs | 2 |
| AC Voltage Range | 310 - 480 V |
| THDI | < 3% |
| AC Grid Frequency | 50 / 60 Hz |
| Max. Efficiency | 98.6% |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Weight | 32 kg |
| Nominal AC Power | 20000 W |
| Max. AC Power | 22000 W |
| Nominal AC Voltage | 400 V |
| Power Factor | 0.8 leading - 0.8 lagging |
| Operating Temperature Range | -25°C to +60°C |
Outlines the sequential process for installing the PV inverter.
Details the procedure and requirements for connecting PV strings.
Describes how to connect the inverter to the AC grid.
Guides through the initial configuration process after installation.
Details how to adjust and configure inverter operational parameters.
Lists steps to follow before and during system startup.
Provides error codes and corrective actions.
To Next Page
