the power supply has sufficient charge.
3. Check the horn of the electric bicycle for proper operation, operate the lighting switch,
and inspect if the front headlight is functioning correctly!
4. Check if the front, left, right, and rear screws are tightened.
5. Inspect if the front and rear wheel screws are tightened and the pedals are in good
condition.
6. Check if the handlebars and saddle are securely fastened.
7. Check if the tire pressure is normal, and inspect for cracks, abnormal wear, and sharp
objects such as nails, stones, or glass embedded in the tires.
*Note: Abnormal tire pressure, tire cracking damage, and abnormal wear are the main reasons
for poor steering and tire blowouts!
8. Check if the steering is flexible without obvious looseness.
9. Inspect the front and rear brake levers. Brake adjustment should make the brakes reliable
and the reset flexible. Increase braking distance on rainy days. Note: To ensure balance
when braking the front two wheels, a pair of symmetrical hydraulic brakes are used for
the front two wheels. If there is a noticeable imbalance between the left and right brakes,
timely maintenance is required.
10. After Afreda S6 is unfolded, the unfolding lock hook under the seat must be fastened.
11. Before riding, make sure to completely release and secure the parking lock. Ensure that
the lock, when released, remains naturally positioned without falling under the influence
of spring force and allows free rotation before proceeding with riding.
Safety Riding:
1．When riding on the road or in public areas, comply with local traffic regulations and
strictly adhere to traffic rules. It is prohibited to ride under the influence or operate the bike
with one hand. Maintain a safe riding speed (the safe speed for this type of tricycle is below
25 km/h or 15mph).
2．Before riding, familiarize yourself with the contents of this manual. Find a spacious,
flat area for training to fully grasp the essentials of riding this bike and become acquainted
To Next Page
Loading...