Assembly Instructions
Step 11:
Step 12:
Next, place 6 springs into the V-rings just left of all the sockets, and stretch the
springs until they reach the frame holes just left of the sockets. Remember to
count!
You now have attached 12 V-rings to the frame holes using 12 springs. There
should be 7 V-rings and 7 frame holes in between each spring.
Now, place one spring directly
to the left of each spring
already placed.
Continuing in a clock-wise
direction, attach the remaining
springs following the pattern of
placing springs directly to the
left of already placed springs
until all 96 springs have been
placed.
Pro tip: Keep to the pattern
here. (See below for example)
Placing springs one directly
after the other will cause
uneven tension making place-
ment increasingly difficult!
Page 13 of 22
To Next Page
Loading...
